Ventilation and protection It is best to use oil-based wood paint outdoors. However, if you can't work outside, make sure that air can circulate through the room you're working in by opening the windows. This is even more important when the stain is drying because VOCs can enter the air as the stain evaporates. Unless you literally spill the stain on the plywood for a gallon, you shouldn't have any problems.
That said, I recommend using water-based dye and finish. It's going to stink, but not as bad as it would on an oil-based basis, or for almost that long. Air circulation is what really helps in times of healing. That's the time when you get the most smell.
Ultimately, if you can't get the fans to come out to release odors and you have to keep the room sealed due to the low outside temperatures, then you've chosen the wrong project and the wrong time of year to do it. But good luck, find something else to do. I usually dye or apply brushed or rolled finishes on the inside. I do spray finishes in the garage, but I quickly, immediately take things inside to dry in an isolated room (usually the master bedroom, which has an attached bathroom).
If you're spraying with bells or a gun, it's important to keep the materials inside until you're ready to spray, or they'll spread strangely because they're cold and slow. However, the compressor must be outside or large amounts of condensation will occur in the air lines. Most people think of oil-based interior dye when it comes to wood dyes. They are easily available and are the easiest to use.
While it is possible to stain wood in cold climates, even if it takes longer to dry (2 to 3 days), it is best to use a low-strength dye so as not to treat problems with a lot of odor. Wood interior dyes and finishes are coatings that protect the surface of furniture while promoting a spectacular appearance made from natural grain. In general, water-based stains contain less VOC, but the same precautions should be taken when using any type of dye or varnish. If you can't postpone indoor wood staining, you can at least ensure adequate ventilation and the right protective equipment, such as masks and gloves, to minimize the risks associated with what is a job that is normally done outdoors.
Normally, it takes 2 to 3 hours for the stain to dry and 24 hours for the stain's odor to disappear when it's hot. Wood dye can take more than 24 hours to dry in cold climates and more than 3 days for the smell of wood dye to disappear. When using interior wood dyes, mastering how to apply the dye can give any old wood surface a completely new look. To determine which type is the best interior wood dye for your project, you need to understand the differences.
The Home Depot offers a wide selection of interior wood dyes and finishes to help your interior wood project work properly. Learning to apply wood dyes offers an alternative to painting furniture and, at the same time, emphasizes its natural color and texture. Unlike paint, dyes are designed to absorb the pigment in wood fibers with a solvent and then, as it hardens or cures, the color adheres to the wood. Of the different dyes for wood and terrace, oil-based wood dyes tend to seep into the pores of the wood without raising the grain.
Choosing the best wood dyes for your project depends primarily on the type of wood or object you use. .
